Concrete Reinforcing Welded Wire Mesh-Rebar Mesh for Slab, Road and Foundation Construction

Reinforcing mesh, also known as rebar mesh, is welded wire fabric made from steel bars or wires in a grid pattern. Welded reinforcing mesh enhances concrete tensile strength and structural integrity in concrete construction.Metech supplies welded reinforcing mesh in compliance to Australia standard, American Standard and other international standard.Our concrete reinforcing mesh products are widely used in construction of floors, roads, pavements, driveways and buildings.Wire material: Carbon steel.

Reinforcing Mesh Australia Standard-AS/NZS 4671:2001

We manufacture and supply welded reinforcing mesh according to Australian standards for reinforcing steel mesh AS/NZS 4671:2001. The specific standard specifies the requirement for steel reinforcing materials used in concrete.

Australia standard reinforcing steel mesh fabric types:

• F52 Mesh 4.75mm x 2.20m x 5.8m: Wire thickness 4.75mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. Used for reinforcement for concrete structures of moderate strength.
• F62 Mesh 6.00mm x 2.20m x 5.8m: Wire thickness 6.00mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. F62 mesh provides enhanced strength due to increased wire thickness ideal for higher tensile reinforcement construction projects.
• F82 Mesh 7.60mm x 2.20m x 5.8m: Wire thickness 7.60mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. F82 Mesh is suitable for applications requiring substantial structural support.
• F92 Mesh 8.55mm x 2.20m x 5.8m: Wire thickness 8.55mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. F92 Reinforcing mesh offers significant reinforcement capabilities, for heavy-duty framework construction.
• F102 Mesh 9.5mm x 2.20m x 5.8m: Wire thickness 9.5mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. F102 Mesh is used for most strong and durable structural construction project.

ASTM A1064/A1064M Standard Galvanized Steel Reinforcement Mesh

We manufacture and supply reinforcing steel mesh according to American standard ASTM A1064/A1064M, the wire mesh is hot dipped galvanized with excellent corrosion resistance meeting ASTM A641/A641M standard set for hot dip galvanizing.

Specification

• Dimensions: 25 x 25 x 2.05 mm

Standard

• Reinforcing Steel Wire Fabric/Mesh: ASTM A1064/A1064M
• Hot-Dip Galvanizing Standard: ASTM A641/A641M

Reinforcing Mesh for Structural Concrete

Formwork Finish Recommended

• Rough Finish: Applied to the sides of foundations.
• Smooth Finish: Applied to the sides of plinths, columns, stairs, and walls. Box out holes/form voids with dimensions of 75mm diameter by 200mm depth.

Reinforcement Mesh Types

• Mild Steel High Tensile Reinforcement Mesh: 25mm diameter wire.
• Steel reinforcement mesh: Made of wire diameter 10mm, 12mm, 16mm, and 20mm.

Concrete Specification Recommended

• Standard Concrete: 10MPa strength with 19mm aggregate.
• Blinding Layer: Minimum thickness of 50mm.
• High Strength Concrete: 30MPa strength with 19mm aggregate, suitable for plinths, columns, surface beds, bund walls, and walls. Unformed surfaces finished with a power float.

Joints

• Expansion Joints: 10mm softboard, raked out and sealed with 10x10mm polysulphide sealant.
• Construction Joints: Integrated into the surface bed.